The Swaging Spin Tools are ready to make flares and swages in tubes with wall thickness between 0.8mm and 1mm.
The Flaring Spin Tools are designed to work with copper tubing of 1/4’’, 3/8”” and 1/2’’ with wall thickness of up to 0.8mm, and up to 1.0mm for the 7/8’’ tubing diameters.
We wish to note that using the Flaring Spin tools on tubing with thicker walls than recommended might cause undesirable deformation and assembling issues. Check our Documentation for details.
Copyright © 2018 SpinTools | Cimport
All rights reserved.